Tuesday 5/23

12:00 Today's self-study session was dedicated to understanding TAF  reports. These forecasts predict weather conditions at airports over a 24 to 30-hour period. They have the same layout as a METAR, starting with "TAF", followed by the station identifier, the date and time the forecast was issued, the valid period of the forecast, and then the forecasted weather conditions. For instance, a TAF report like "TAF KATL 231120Z 2312/2418 27010KT P6SM SCT040" implies: The forecast is for Atlanta International Airport (KATL), issued on the 23rd day of the month at 1120Z time. It's valid from the 23rd at 1200Z to the 24th at 1800Z. The wind is expected to be from 270 degrees at 10 knots, visibility will be more than 6 statute miles, and there will be scattered clouds at 4000 feet.

Total hours: 1



Comments

Post a Comment

Popular posts from this blog

Tuesday 5/16

Image
8:00 Today, I started my day at flight school by focusing on self-study for the written test, mainly revising what I had learned yesterday. From 10:00 to 12:00, I was back in ground school with Alan, learning about wind and weather patterns that affect flight. We discussed how changes in pressure and temperature can create wind, and how these winds interact with terrain to form predictable patterns. We also covered how to interpret METAR reports, which provide timely information about weather conditions at airports. From 12:00 to 1:00, I took a break for lunch and grabbed a quick meal at McDonald's. After lunch (1:00 to 3:00), I jumped back into the simulator with Alan. We continued practicing with the Bonanza, this time simulating a flight from Centennial Airport to Aspen, one of the highest altitude airports in the U.S. I'm getting better at landing in the simulator, but it’s much easier than landing the actual plane. At 3:00, George and I went up for some actual flying, wher
Read more

Monday 5/8

Image
8:00 My inaugural day at the flight school, NFS, began with an introduction to my mentor, George. We dove in, discussing the aerodynamics and the four fundamental forces at work: weight, lift, drag, and thrust. 10:00 After the initial introduction, I had a session with another instructor, Alan. We delved deeper into flight instruments, understanding their readings and their implications in-flight. 12:00 A well-earned lunch break at TGI Fridays with Phuc offered some respite from the intense morning of learning. 1:00 Upon my return to school, Alan introduced me to the flight simulator. My initial maneuver led to a stall and subsequent crash into a cluster of virtual buildings. Despite an early setback, practice helped me get more comfortable with the simulator. Later, George and I drove around a PA28 at the flight school. Accompanied by George, we drove to refuel, following which we taxied back, and I left the school at 5:00. Total Hours: 8
Read more

Monday 5/15

Image
  8:00 Today, my day at flight school started with some morning self-study, once again quizzing myself for the written test. 10 to 12 was spent with Alan, focusing on airspace regulations and different classes of airspace. I learned about Class A, B, C, and D airspace, each with their specific requirements for communication, equipment, and pilot certification. For instance, in Class B airspace, which surrounds the busiest airports, pilots must obtain a clearance before entering, while in Class C airspace, two-way communication is necessary before entering the area. From 12:00 to 1:00, I had lunch. At 1:00, I hopped into the simulator with Alan and had the opportunity to fly a new aircraft, the Bonanza. We simulated a flight from Manchester to Albany, and I learned about the constant speed prop, which provides greater efficiency and control over the engine's power output. After the simulator session, George and I took to the skies and flew to Concord, where we practiced landings. Th
Read more